Fittings are used to surround the end of pipe rails and connect multiple pieces together. We carry elbows, tees, crosses, and standard flush weld pipe elbows.

Direct Link™: Handrail fittings section of our catalog in PDF format.

Pipe Rail Fittings:

Elbow, Tee and Cross handrail fittings are formed with a short radius and are also held in place for welding with a WEDGE-LOCK connector.

• Elbows, Tees & Crosses Available Standard & Side Outlet
• Sizes: 1", 1 1/4" & 1 1/2"
• Materials: Carbon Steel, Aluminum, Stainless Steel, Bronze

Standard Flush Weld Pipe Elbow Fittings:

Standard radii and configurations of elbows are available for various railing requirements. Elbows are easily held in place by a WEDGE-LOCK welding connector then welded and grounded for a flush, smooth connection.

• Elbows Are Available With Tangents Of Any Length On One Or Both Ends (Standard Is 2" Long)
• All Fittings Available With An Inside Radius (R) of 1", 1 5/8", 2", 3", 4", 5", 6", 7" 8" & 10"
• 3/4" Elbows May Be Furnished With Tangents
• Can Be Used With WEDGE-LOCK Connectors For Best Alignments
• Use With Connectors At Both Ends Of Elbow
• Sizes: Most fittings are available for the following:
              Pipe Sizes: 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2" & 3"
              O.D. Tubing: 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3" & 5"
• Material: Carbon Steel, Aluminum, Stainless Steel, Brass, Bronze
• Finishes: Mill Finish Or Other Finishes As Required