Safety-Grip® Safety Grating is
a one-piece metal plank grating manufactured by a cold forming
process in the shape of a channel. The web of the channel is
the walking surface and has large debossed holes, surrounded
by smaller embossed traction buttons.
 Safety
Grip safety grating glossary section of our master catalog (PDF)
Grating Mini Catalog (PDF)
FEATURES & BENEFITS:
• Embossed traction buttons provide superior slip resistance in all directions and in all weather conditions.
• Large
debossed holes provide maximum drainage of debris and allow up
to 50% free air opening depending on panel width.
• Self-cleaning due to resilience of walking surface.
• One-piece metal construction.
• Lightweight design provides high strength to weight ratio.
• Long life span requiring little maintenance.
• Simple and economical installation as planks are self-framing.
• Adaptable to cost effective custom fabrication.
• Can be easily formed in standard channel or custom shapes.
• Channel depths of 1 1/2", 2", or 3"
Safety Grip Sizing Options:
| Panel Width "A": |
Return Flange "B": |
Hole to Channel Edge "C": |
| 5" * |
7/8" |
1 21/32" |
| 7" |
1" |
1 13/16" |
| 10" |
7/8" |
1 5/8" |
| 12" * |
1" |
1 25/32" |
| 18" * |
1" |
1 13/32" |
| 24" |
1 1/8" |
1 7/8" |
| 30" * |
1 1/8" |
2 11/32" |
Note:
1. Tolerance on A, B, & C dimensions is +/- 1/8"
2. Hole pattern shown on diagram is even. Widths indicated
with " * " have a staggered hole pattern.
3. Outside traction buttons on all widths except 18" & 24" |
Safety Grip Diagram - Top View:
Safety Grip Diagram - End View:
 |
