|
 |
|
Fiberglass Anchoring Devices |
 |
|
Fibergrate offers specially-designed
attachments and clips, both to fasten panels together and to secure
them to support structures. All types are made of Type 316 Stainless
Steel and are available in 1”, 1-1⁄2” and 2” sizes.
Install clips a maximum of every 48” and use at least four
clips per piece of grating (at least eight clips per 4’ x
12’ panel)
 Fiberglass
grating anchoring section of our catalog (PDF)
Grating Mini Catalog (PDF)
Clip Assemblies For Molded Grating:
Type J Hold Down Clips:
Secure grating panels to support frames.
Type F End Panel Clips:
Provide a simplified method
for joining factory edges of adjacent abutting panels
(not for use with Chemgrate resins).
Type G Hold Down Clips:
Attach grating to any structural member
flange, 3/4” or smaller in thickness, with no drilling required.
Type M Hold Down Clips:
Secure panels to a support in the same manner
as type J Clips, but designed to use two adjacent grating bars
for a more secure fit. Similar in design to metal grating saddle
clips.
Clip Assemblies For Pultruded Grating:
Fibergrate’s patented Type R Hold Down Clip Assembly
of Type 316 stainless steel offers effective and easy installation
of pultruded grating.
Fibergrate also offers Type M Hold Down Clip Assemblies for many
pultruded grating types such as:
• MI-40 for I-4010
and I-4015 grating
• MT-5020 for T-5020 grating
• MT-3810
for T-3810 grating
• MI-60 for I-6010 and I-6015 grating
• MT-3320
for T-3320 grating
• MT-3815 for T-3815 grating
• RI-40 for I-4010 and I-4015 grating
• RIT-60 for I-6010, I-6015,
and T-3320 grating
• RT-80 for 5020 grating
• RT-12 for
T-1210 and T-1215 grating
• RT-25 for T-2510 and T-2515 grating
 |
| |
|
|
